OPNsense Optional Port Configuration This article covers configuring OPT ports for use in OPNsense. This will include: assigning the interfaces, enabling DHCP, and a basic firewall rule to allow connection to the internet. Prerequisites OPNsense installed and access to the web interface. OPNsense 20.7 was used for this article Assigning and enabling Interfaces This section […]
How to configure OPNsense for the Internal 4G LTE Modem Protectli offers 4G LTE Modems and service subscription plans. An overview can be found on the main 4G LTE page. One of the options is an internal modem, the MDG100. In order to use the MDG100, an Operating System (OS) must be installed on the Vault […]
How to Configure a WiFi module in OPNsense This article covers configuring the Protectli WiFi Kit in Access Point Mode for OPNsense. This includes interface assignment, interface configuration, a DHCP server, and firewall rule. Prerequisites Protectli Vault with WiFi Kit installed OPNsense is installed. Version 20.7 was used for this article Add Device […]
Overview This article covers how to enable a LAN bridge in OPNsense. LAN bridges act as a switch using the optional ports on the Vault. While not optimal compared to using a separate physical switch, it works if needed. Note: This will require physical access to the Vault if the port being used to access […]
OPNsense Overview OPNsense is an open source, easy-to-use and easy-to-build HardenedBSD based firewall and routing platform. It is a popular choice for those interested in an open source firewall. More information about OPNsense can be found on the OPNsense website https://opnsense.org/ Pre-Installed information OPNsense can now be selected as a pre-installed option during checkout. Here […]