The Vault is a small form factor network appliance built for use as a firewall / router and is compatible with a variety of open source firewall projects. The FW4A-0-4-32 comes with 8GB DDR3L RAM and 128 mSATA.
This CPU supports AES-NI.
Tested compatibility: Most open source software firewall solutions, including pfSense, VyOS, OPNsense, Security Onion, Untangle, CentOS 7, *BSD, Linux, and Windows.
4x Intel 82583V NIC ports (note that Intel ports are known to cause less problems than realtek or others)
Intel Atom E3845 Quad Core CPU @ 1.91GHz, 64 bit
Compatible with DDR3LPC-1600 RAM, single SO-DIMM
Compatible with any size mSATA SSD
1x USB 3.0 port, 1x USB 2.0 port
COM port (serial COM cable included)
VESA mount for mounting to a wall or the back of a monitor
Power supply included with US cord
Runs on approximately 10 Watts under moderate load
Ready for wireless, with pre-drilled chassis holes
Optional Wireless card available from Protectli. Card is USB Channel and fits in a PCIe form factor.
Smallest firewall solution available at just 5.2 x 4.9 x 1.5 inches (134 x 126 x 36 mm)
Operating Temperature -4 to 140 degrees Fahrenheit (-20 to 60 degrees Celsius)
All metal enclosure for durability and heat dissipation
WAN=NIC1, LAN=NIC2, OPT1=NIC3, and OPT2=NIC4
This device is small and it’s fanless, so there’s no noise. The 4 Intel NIC ports are proven to be the most reliable for use with high throughput packet switching applications and the Vault can route at gigabit wire speeds (930Mbits per second as tested with iPerf). Use the 4 ports to configure different layers of security within your network for extra protection. Set up a VPN or Captive Portal. Add available packages like Snort, or NTOP.